We know your car is important to you: so we have developed the Shell Car Care range to clean, protect and enhance your vehicle's interiors and exteriors, and keep car maintenance easy and simple, all year round.
The Shell Car Care range has been specially formulated to provide maximum benefits at minimum effort, with consistent high quality for your peace of mind. The range includes Glass, Interior and Exterior Cleaning to keep your car looking like new. Our Car Maintenance products allow you to keep your car in good working condition with easy and simple everyday upkeep.
Performance Liquids
Shell Brake & Clutch Fluid DOT 3
Performance Liquids
 |
A high boiling point fluid suitable for brake systems and hydraulic clutch systems requiring FMVSS No 166 DOT 3 (ISO 4925 Class 3) fluid.
üSuitable for cars, bikes, and vans
üPrevents corrosion
Specification • FMVSS NO.116 DOT3, ISO 4925 (Class 3), SAE J 1703
Contains • Butyl triglycol <45%, Diethylene glycol <25%, Methyl diglycol <3%, Butyl diglycol <3%
• 500 ML
How to use • Follow vehicle manufacturer’s recommendations when adding brake fluid
1. Keep brake fluid clean and dry. Contamination with dirt, water, petroleum products or other materials may result in brake failure or costly repairs. 2. Store brake fluid only in its original container. Keep container clean and tightly closed to prevent adsorption of water. 3. CAUTION. Do not refill container and do not use for other liquids. 4. Brake fluid damages paint work – if spilt, wash off immediately with plenty of water. KEEP OUT OF REACH OF CHILDREN. |
Shell Brake & Clutch Fluid DOT 4
Performance Liquids
 |
A high boiling point fluid suitable for brake systems and hydraulic clutch systems requiring FMVSS No 166 DOT 4 (ISO 4925 Class 4) fluid.
üSuitable for cars, bikes, and vans
üPrevents corrosion
Specification • FMVSS NO.116 DOT3, ISO 4925 (Class 3), SAE J 1703
Contains • Butyl triglycol <45%, Diethylene glycol <25%, Methyl diglycol <3%, Butyl diglycol <3%
• 250 ML
How to use • Follow vehicle manufacturer’s recommendations when adding brake fluid
1. Keep brake fluid clean and dry. Contamination with dirt, water, petroleum products or other materials may result in brake failure or costly repairs. 2. Store brake fluid only in its original container. Keep container clean and tightly closed to prevent adsorption of water. 3. CAUTION. Do not refill container and do not use for other liquids. 4. Brake fluid damages paint work – if spilt, wash off immediately with plenty of water. KEEP OUT OF REACH OF CHILDREN. |
Shell Brake Cleaner
Maintenance
 |
Efficiently removes brake disc wear, dirt and grime from brakes to dramatically improve the braking effectiveness of dirty brake linings.
üRemoves dirt and grime
üPrevents brake noises
Contains • Propane <30%, Butane <30%, Solvent Naphtha <70%
• 400 G
How to use • Always use Shell Brake Cleaner in a well ventilated area. Make sure rubber brake parts are protected from overspray. Spray brake cleaner liberally onto brake surfaces such as brake pads, linings, cylinders and brake drums, then allow product to penetrate. Allow product to air dry or use a clean cloth. For heavily soiled areas, repeat process if required.
|
Shell Engine Degreaser
Maintenance
 |
An easy to use, general purpose degreaser designed to immediately penetrate and remove oil, grease and soil from parts and equipment.
üRemoves oil, grease & dirt
Contains • Propane <10%, Butane <30%, 2-Aminoethan-1-ol <10%, Solvent naphtha <60%
• 400 G
How to use • Spray Engine Degreaser generously on the area to be cleaned. Leave to penetrate for 3 minutes then simply hose off, making sure to cover electrical components before doing so. Extremely saturated grease areas should be brushed to aid penetration of the degreaser prior to hosing off.
KEEP OUT OF REACH OF CHILDREN. |
Shell Multi-Function Spray
Maintenance
 |
A dewatering & deeply penetrating cleaner designed to permeate stiff and rusted parts, shield from moisture and other corrosive elements, clean grime and dirt, lubricate stiff joints, and prevent annoying squeaks.
üCleans & lubricates
üLoosens rusted parts
Contains • Propane <30%, Butane <30%, Solvent Naphtha <70%, Petroleum distillates <25%
• 400 G
How to use • Shake can well before use. For moisture control and lubrication, spray liberally and evenly onto affected parts. For rust and corrosion prevention, spray liberally and allow to stand several minutes to affect maximum penetration. For corrosion protection, spray over area requiring protection and reapply periodically as required.
KEEP OUT OF REACH OF CHILDREN. |
Shell Radiator Stop Leak
Maintenance
 |
An engine coolant system flushing fluid designed to clean and flush radiator systems prior to adding a Shell Coolant. Suitable for use in all automotive and heavy duty petrol, diesel and gas engines.
üFor all engines
üQuick repair fluid
Contains • Sodium metasilicate <30%.
• 500 ML
How to use DO NOT REMOVE RADIATOR CAP WHEN ENGINE IS HOT • Turn on vehicle’s engine and ensure heater is on. Run the engine until operating temperature is reached. Shake bottle and add Shell Radiator Stop Leak to the radiator. Top up with demineralised water (if required) and replace radiator cap. Allow engine to run for a further fifteen minutes to ensure distribution of Shell Radiator Stop Leak through the system. Check for leaks.
APPLICATION RATES: • Add 500mL of Shell Radiator Stop Leak per 10 litres of coolant or part thereof. Seek advice from Radiator specialist as soon as possible.
NON-HAZARDOUS. KEEP OUT OF REACH OF CHILDREN. |
Shell Tyre Repair
Maintenance
 |
Re-inflates and seals tyres to enable immediate driving in emergency situations where neither the tyre can be removed nor a spare is available.
üInstantly repairs punctures
Contains • Propane <30%, Butane <15%, Ethane-1,2-diol <5%, Polyvinyl acetate <5%, Sodium benzoate <1%, Ammonium hydroxide <1%, Water <60%
• 280 G
How to use • If possible, remove the cause of the puncture and position the puncture at the lowest point of the tyre. Shake well before use. Best performance occurs at room temperature (19-25 Deg C).
Screw nozzle firmly onto tyre valve. Remove protective cap from aerosol. Hold can upright and press button to fill tyre. Continue until tyre is inflated then disconnect. Immediately drive 5 to 10km at a moderate speed to allow product to act, whereby the liquid will spread evenly inside the tyre whilst driving, hence sealing the hole in the tread. As soon as possible, adjust tyre pressure to the prescribed level and have the tyre examined by a professional Only store in car trunk or boot Not advised to be used for side wall damage to tyres KEEP OUT OF REACH OF CHILDREN. Pressurised container: do not pierce or burn, even after use. |
