Re-inflates and seals tyres to enable immediate driving in emergency situations where neither the tyre can be removed nor a spare is available.

Contains
• Propane <30%
• Butane < 15%
• Ethane-1,2-diol <5%
• Polyvinyl acetate <5%
• Sodium benzoate <1%
• Ammonium hydroxide <1%
• Water <60%

How to use
• If possible, remove the cause of the puncture and position the puncture at the lowest point of the tyre.
• Shake well before use. Best performance occurs at room temperature (19-25 Deg C).
• Screw nozzle firmly onto tyre valve.
• Remove protective cap from aerosol. Hold can upright and press button to fill tyre. Continue until tyre is inflated then disconnect.
• Immediately drive 5 to 10km at a moderate speed to allow product to act, whereby the liquid will spread evenly inside the tyre whilst driving, hence sealing the hole in the tread.
• As soon as possible, adjust tyre pressure to the prescribed level and have the tyre examined by a professional
• Only store in car trunk or boot
• Not advised to be used for side wall damage to tyres